Chainometric Balance
Specification:
provide speedy, automatic registration of fractional weights. A light chain hangs from an adjustable support and is attached to the balance beam, so that the beam supports a variable weight of chain.
By lowering the support a great length of chain hangs from the beam.
Hydrostatic Balance
Specification:
A hydrostatic balance is a particular balance for weighing substances in water. Hydrostatic balance allows the discovery of their specific gravities. This equilibrium is strictly applicable when an ideal fluid is in steady horizontal laminar flow,
and when any fluid is at rest or in vertical motion at constant speed.
Steelyard Platform Scales
Specification:
Steel Yard Type Mechanical Platform Scale has been designed and Manufactured to
ensure the lifelong accuracy durability under very poor weighing conditions.
Chemical Balance
Specification:
Chemical balance is a beam balance instrument that is used in a quantitative measure of the chemical with great precision. It measures the mass of the chemical up to four decimal places. It is used in the quantitative analysis of the chemical.
It has the ability to recognise any minimal deviation.
Infra-Red Moisture Balance
Specification:
IR Moisture Balance is a very reliable method to measure the moisture content of most food products. With a product sample placed within a climate-controlled chamber, these units essentially dry a
product with a heating mechanism while simultaneously weighing the product.
Counter weighing scale
Specification:
Due to their high precision and advanced technology, precision balances are used in laboratories in order to efficiently perform tasks such as weighing test materials and sampling amounts, formulation, density determination,
purity analysis, quality control testing and material and conformance testing.
Jewellery Balances
Specification:
A jewelry balance is a device designed to accurately
weigh diamonds, gemstones, gold, silver, and other precious metals.
Triple Beam Balance
Specification:
The triple beam balance is used to measure masses very precisely; the reading error is 0.05 gram.
With the pan empty, move the three sliders on the three beams to their leftmost positions, so that the balance reads zero. If the indicator on the far right is not aligned with the fixed mark, then calibrate the balance by turning the set screw on the left under the pan.
Once the balance has been calibrated, place the object to be measured on the pan.
Move the 100 gram slider along the beam to the right until the indicator drops below the fixed mark. The notched position immediately to the left of this point indicates the number of hundreds of grams.
Now move the 10 gram slider along the beam to the right until the indicator drops below the fixed mark. The notched position immediately to the left of this point indicates the number of tens of grams.
The beam in front is not notched; the slider can move anywhere along the beam. The boldface numbers on this beam are grams and the tick marks between the boldface numbers indicate tenths of grams.
To find the mass of the object on the pan, simple add the numbers from the three beams.
As with a ruler, it is possible to read the front scale to the nearest half tick mark.
Crane Weighing Scales
Specification:
Crane Scales for weighing upto 50 ton.